Follow these easy steps to get your Zanussi ZRT 143W1 Refrigerator up and running in no time.
The appliance and the interior fitting are protected for transport. Remove all packaging and any adhesive tape. Any remnants of adhesive can be removed using white spirit.
After transportation, the appliance must not be switched on for 2 hours. This is to allow the refrigerant to settle.
Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litres of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.
To ensure correct operation, the appliance should be located where the ambient temperature is between 16-32 °C. Make sure that the air openings of the appliance are not obstructed and follow the ventilation requirements.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Plug in the appliance and switch on at the mains supply.
Turn the thermostat control to the required setting. A setting of 3 - 4 is usually suitable for normal operation. Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside.
The thermostat control situated inside the refrigerator regulates the temperature of the larder compartment.